![]() |
|||||||
![]() |
|
|||||||
| General Discussion General Toyota Diesel related discussion |
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
|
#1 |
|
Senior Member
Join Date: Feb 2004
Posts: 457
![]() |
There are the (6) 6mm Philips head screws that hold the oil pump cover in place. No one here has them nor will look for them.
Is this my area or are these hard to come by???? :n: My nearest TOYOTA dealer is 2 hours away....... They are (course thread), 6mm & the shank is 7mm long below the taper or 12mm total length. Here's a picture. If you can get them please let me know! Thanks, Gerald
__________________
Where ever you are, that's where you'll be !!! :D |
|
|
|
|
|
#2 |
|
Site Contributor
Join Date: Jul 2004
Location: Okanagan Valley, British Columbia
Posts: 191
Country:
![]() |
Hey Gerald,
Do you have a part number for thoses? I could call the Toyota dealer here and see if they have them so you don't make the trip for nothing (I assume Penticton is the closest dealer to you). Or if you want to contact them yourself.... Penticton Toyota : (250) 493-1107 They close at 5pm and the parts area is not open on sat/sun. They might make them available on sat if you pre-pay since the sales area is still open. I'd offer to pick up but I'm not off work until 5:30 :( regards, Brad |
|
|
|
|
|
#3 |
|
Administrator
Join Date: Feb 2004
Location: Louisiana
Posts: 2,277
Country:
![]() |
15115-54012 is the part number. Let me know if you need me to check with my dealer.
__________________
|
|
|
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|